Implementation of integrated design systems in the learning process
https://doi.org/10.21122/2309-4923-2021-1-71-75
Abstract
The modern stage of development of CAD-systems is characterized by a significant expansion of the scope of their use. An interesting direction for improving CAD systems is their integration with CAM systems. One of the main tasks solved by CAM systems is the development of control programs for CNC machines. Many software developers for automation of design and technological preparation of production have already equipped their systems with appropriate modules. These circumstances pose an urgent task for higher educational institutions to introduce the study of integrated CAD/CAM systems into the educational process of training design engineers. In this case, the emphasis should be placed on the practical mastery of the skills of developing control programs using a 3D-model of the manufactured part. The stages of preparation for the implementation of the system are described, starting with the analysis of the market of necessary software products and ending with the adaptation of the licensed system to the conditions of use in the educational process of the university. A link is given to the description of the methodology used in the assessment of automated systems at the stage preceding the tender for their purchase. It is emphasized that the study of the possibility of using a CAD/CAM system in the preparation of design engineers was carried out by students during the course and diploma projects in the discipline “Automated systems for technological preparation of production”. The methodology for designing control programs used by students is given, and the results obtained are assessed.
About the Author
A. V. Petukhov
P. O. Sukhoi State Technical University of Gomel
Belarus
Belarus
Petuhov Aleksandr Vladimirovich – Senior lecturer of the chair «Technology of mechanical engineering»
Gomel
References
1. Akulovich L. M., Sheleg V. K. Osnovy avtomatizirovannogo proektirovaniya tekhnologicheskih processov v mashinostroenii [Fundamentals of computer-aided design of technological processes in mechanical engineering]. Minsk: New knowledge Publ., 2012. – 488 p. (in Russian).
2. Epifanova O. V., Troickij D. I. Avtomatizaciya tekhnologicheskoj podgotovki proizvodstva detalej, izgotavlivaemyh na oborudovanii s CHPU [Automation of technological preparation for the production of parts manufactured on CNC equipment]. Izvestiya TulGU. Tekhnicheskie nauki [Izvestiya TulGU. Technical science] № 3. Tula: TulGU Publ., 2011. – p. 53–61. (in Russian).
3. Epifanova O. V., Troickij D. I. Metodika optimal’nogo vybora struktury CAM-sistemy [Methodology for the optimal selection of the structure of the CAM system] Izvestiya TulGU. Tekhnicheskie nauki [Izvestiya TulGU. Technical science]
4. № 3. Tula: TulGU Publ., 2011. – p. 21–29. (in Russian).
5. Grabchenko A. I., Vnukov Yu. N., Dobroskok V. L. Integrirovannye generativnye tekhnologii [Integrated Generative Technologies]. Kharkiv: National Technical University «Kharkiv Polytechnic Institute» (NTU «KhPI») Publ., 2011. – 416 p. (in Russian).
6. Oficial’nyj sajt firmy ASKON [ASCON official website] Available at: www.ascon.ru (accessed: 12.11.2013) (in Russian).
7. Oficial’nyj sajt kompanii «Top Sistemy» [Official site of the company “Top Systems”] Available at: www.tflex.ru (accessed: 12.11.2013) (in Russian).
8. Oficial’nyj sajt kompanii INTERMEKH [The official website of the company INTERMEX] Available at: www.intermech. ru (accessed: 12.11.2013) (in Russian).
9. Pestrecov S. I. CALS-tekhnologii v mashinostroenii: osnovy raboty v CAD/CAE-sistemah [CALS-technologies in mechanical engineering: the basics of working in CAD / CAE-systems] Tambov: Tambov State Technical University Publ., 2010. – 104 p. (in Russian).
10. Petukhov A. V. Formalization of the problem of selection of automated system. «System analysis and applied information science». 2018;(1):16–20. https://doi.org/10.21122/2309–4923–2018–1–16–20
11. Petukhov A. V. Digital Transformation of Technological Design in the Preparation of Design Engineers: History and Prospects. Digital Transformation. 2020;(1):57–72. https://doi.org/10.38086/2522–9613–2020–1–57–72
12. Poletaev V. A. Komp’yuterno-integrirovannye proizvodstvennye sistemy: uchebnoe posobie [Computer-integrated production systems: study guide] Kemerovo. Kuzbass State Technical University Publ., 2011. 201 p. (in Russian).
13. Ruseckij A. M., Vityaz’ P. A., Hejfec M. L. Avtomatizaciya i upravlenie v tekhnologicheskih kompleksah [Automation and control in technological complexes]. Minsk: Belarusian Science Publ., 2014. – 375 p. (in Russian).
Review
For citations:
Petukhov A.V. Implementation of integrated design systems in the learning process. «System analysis and applied information science». 2021;(1):71-75. https://doi.org/10.21122/2309-4923-2021-1-71-75
Views:
2019
Email this article 