An improved combined method of creating control forces and moments for an unmanned aerialvehicle
https://doi.org/10.21122/2309-4923-2022-1-27-33
Abstract
improved combined (aerodynamic and gas-dynamic) method of creating control forces and moments.
The objectives of the study are to analyze the basic model of the combined control method and the possibility of using an improved model of the combined control method, at which the invariability of the mass and dimensional characteristics of the upgraded control object will be achieved with a simultaneous increase in the target quality (reduction of the final miss).
Research is based on the use of an improved method for creating control forces and moments, where the optimization of mass characteristics is made, for using of a smaller number of micropulse motors (only at the stages of acceleration and braking), and when setting the balancing position (maintaining a steady angle of attack), instead of impulse engines, a steering drive is used standard onboard stabilization system of an unmanned aerial vehicle aerodynamic control channel. Which ultimately made it possible to preserve the invariability of the mass characteristics of the aircraft being upgraded and to increase the accuracy of its guidance.
The results of experimental mathematical modeling confirm the effectiveness of the proposed synthesis.
About the Author
A. V. Lopuhov
Military academy of the Republic of Belarus
Belarus
Lopuhov Andrey Victorovich, master of technical sciences
Belarus
Lopuhov Andrey Victorovich, master of technical sciences
References
1. Fan Yonghua, Li Xin, Yang Jun, Zhang Yuzhuo, Design of Autopilot for Aerodyynamic Reaction-jet Multiple Control Missile Using Variable Structure Control, Proceeedings of the 27th Chinese Control Conference, Jule 16-18, 2000.
2. Yong Seok Choi, Ho Chul Lee, Jae Weon Choi, Autopilot design for agile missile with aerodynamic fi and side thruster SICE 2003 Annual Conference, 2, pp.1476–1481.
3. Yuhang Wang, Yu Yao, Kemao Ma, Laterial Thrust and Aerodynamics Blended Control System Design Based on Variable Structure Model Following, Intelligent Control and Automation, 2006, WCICA 2006. The Sexth World Congress on, vol.2, no., pp.8183– 8186.
4. Zhao Yuyu, Yang Baoqing, Li Xinglong, Adjustable lateral thrust and aerodynamics blended control system design based on auto disturbance rejection controller, Control Conference (CCC), 2013 32nd Chinese, 26-28 July 2013, pp.5041, 5045.
5. Wu Hao Tien, Synthesis of an on-board stabilization system for super-maneuverable unmanned aerial vehicles with a combined method for creating control forces and moments based on the method of diagrammatic coeffi / Technique and Technology.
6. – 2013. – №6(59). – P. 14–25.
7. 3. Designing anti-aircraft guided missiles / I.S. Golubeva [et al.]; under the general. ed. I.S. Golubeva M.: Publisher MAI, 1999. 728 p.
8. Lopukhov, A.V. Method for increasing the effi of guidance of an unmanned aerial vehicle at high speed and higly maneuverable targets / A.V. Lopukhov, A.A. Babchenok // Systems analysis and applied informatics. – 2020. – №1. – P. 4–10.
9. Kuhn, A. A. Fundamentals of building rocket control systems / A. A. Kuhn, V.F. Lukyanov, S.A. Shaban. – M.: Publishing House. Academy, 2016. – 232 p.
10. Lopukhov, A.V. On-board stabilization system of anti-aircraft guided missiles with a combined method of creating control forces and moments / A.V. Lopukhov, A.I. Phedorov, V.R. Dragun // Herald of the military academy of the Republic of Belarus. – 2021.
11. – №3(72). – P. 42–49.
Review
For citations:
Lopuhov A.V. An improved combined method of creating control forces and moments for an unmanned aerialvehicle. «System analysis and applied information science». 2022;(1):27-33. (In Russ.) https://doi.org/10.21122/2309-4923-2022-1-27-33
Views:
292
Email this article 